Your Language: English
satisfaction 100% Guaranteed
World wide delivery
0
You have no items in your shopping cart.

0

Welcome to MS Motorsports

More Views

Intrax 1K2 Coilover Kits

Availability: In stock

£0.00

Quick Overview

Intrax 1K2 Coilover Kits, For race and track day enthusiasts, these superb Quality coilover kits come complete with Camber and caster top mounts and are built totally to your car and driving type

Details

1K2 shock absorber
The 1K2 is a real “high-end” shock absorber for demanding street- and competition use. The 1K2 is build using the finest materials. The housing is made from 7075 aluminum. This guarantees low weight, maximum strength and optimum cooling.

The 1K2 damper is always chosen in the largest size possible for the most accurate damping control: normally a 46mm body with a 40mm piston and a 16mm piston rod. Mc. Pherson struts are normally converted from the standard 22mm piston rod to an upside-down system with a 40 or 45mm guidance tube for maximum stiffness and wheel guidance. This is especially important when the G-forces are higher than obtainable with the standard vehicle.

The 1K2 can optionally be equipped with the “Black Titan” coating on the guidance- and piston rod. This is a coating that cannot rust and is extreme hard and smooth. The friction is lowered with these piston rods, improving comfort, reducing oil temperatures, improving traction and extending life time under the severest conditions. The “Black Titan” is a luxury which - if you can afford it – is certainly recommended.

When there is sufficient room available, the 1K2 can be equipped with a “spring rate adjuster” which makes it possible to change the spring constant without removal of the struts/springs. See for more info the category products > spring rate adjuster,

Settings
We take suspension serious. Therefore we offer for most applications different settings on the spring rates, shim stacks and damping pistons:
* Fast street / occasional trackday. An upgrade to the sportive side from the OEM equipment. Daily comfort, vibration and noise levels are just as important as handling.
* Trackday / bumpy race circuit / Nordschleife. A suspension to race on both smooth and bumpy circuits. It is possible to ride to- and from the circuits. Ride height is enough to drive on public roads. Laptimes and handling are more important than comfort levels.
* Full-race / rally. Stiff suspension, designed to work with slicks and rollcage fitted. Not useable on the street. Lap time optimized.

Options

ARC (Anti Roll Control)®

After years of development Intrax did it. They developed a unique way to drastically reduce unwanted roll (lateral and longitudinal). Your car will have the comfort and all the other benefits of driving with “soft” springs like extra grip and traction, until you take a corne or need to brake then ARC® will control ride height with the feel of a sport/race/rally setup. While driving over a curb, through a putt hole or over jumps the suspension will absorb them like driving with soft springs. At the same time ARC® will make sure that your suspension won’t during these conditions. So for the first time you can have the benefits of a soft spring set up without the disadvantages of too much body roll and/or collapsing suspension in putt holes, jumps, curbs.

Black Titan
Black Titan is a development that has been done for the military air force. They were looking for something that would make the engines more resistant to the various tortures they are exposed to (frostbite, extreme heat, snow, sandstorm etc.). This has become Black Titan, extremely hard, very low friction coefficient and resistant to corrosion. After using Black Titan on their aircraft engines, the maintenance interval was sometimes extended by 100%.

Intrax has thought, which is good for their engines, is also good enough for our shock absorbers. The coating is placed on the guide and piston rod, which is no longer prone to corrosion, but the friction with the other components is also reduced, which again benefits the damper's action.

Intrax is a Dutch manufacturer of high-end suspension technology with over 35 years experience at the highest levels in racing. Intrax designs and produces shock absorbers, springs and suspension packages for Formula 1 cars, road cars and everything in between. In addition to an elaborate street- and competition program, Intrax also delivers “custom-made solutions”. Please inform at us what we can mean for you.

Please enquire as the range is huge and we can tailor a setup to fit your budget and vehicle needs.

These are custom made to suit so allow two to three weeks for delivery.

Additional Information

SKU Intrax1k2
Sold per 4
brand Intrax
Model Universal
Make Universal