We use cookies to make your experience better. To comply with the new e-Privacy directive, we need to ask for your consent to set the cookies. Learn more.
Pagid Racing E2126 in RST5 compound brake pads for various Ford cars
£437.95
Pagid Racing RST brakepads are excellent brakepads for sprint races or rally cars.
RST brakepads have consistent firm pedal at all temperatures with good cold friction starts, even fade resistant at the highest disc temperatures.
With their good modulation and controllability they provide the driver with progressive in-stop behavior and instant pedal response.
application range:
Specifically designed and developed for rally racing.
Comes for a variety of different pad shapes established in rally sports, especially WRC and Group R.
Description:
The optimized thermal management provides ideal performance from low temperatures to extremely high temperature conditions. The generated heat stays in the brake pad and does not move into the brake fluid. With its high initial bite and generally high friction level the RST 5 perfectly manages the balance between high aggression and prevention of wheel spin, providing the driver with a feeling of reliability and outstanding performance.
Pad fitting:
New brake pads must move freely in the caliper guides. Always use the appropriate pad shape to ensure proper fit.
When new pads are installed, always ensure that the pedal is pumped up to take up any caliper piston travel prior to driving the vehicle.
Brake pad bedding in:
In the first phase of the bedding in procedure, you have to create a perfect contact-pattern between disc and pad.
And this is how it works: you have to do about 10 stops with low pressure and low temperature from 150 km/h to approximately 80 km/h.
The distance between each brake stop should be between 600 and 800 meters.
Pad fade:
If the temperature between pad and disc gets too high, gasses build up an air cushion between pad and disc. The pedal remains stiff, but the stopping power is reduced.
Solutions are an improved cooling, change to a higher temperature range pad material or a higher mass brake disc.
Brake pad size:
A bigger pad does not mean a bigger stopping power.
But the greater heat capacity of the larger pad can improve modulation, wear rate and lead to more consistent performance.
Brake balance:
A perfect brake balance is important in order to reach a minimum stopping distance by maintaining good vehicle stability.
The bias setting can be done with either correct selection of the friction material and respective friction coefficients or also by race cars which are having a balance bar by adjusting the balance bar into the correct position.
Brake backingplate:
To guarantee a perfect connection between friction material and backing plate, PAGID Racing is using a specific retention system with brass studs that are welded directly to the backplate.
These brass studs are softer than the brake disc (rotor) and wear away as the pad is consumed causing no damage to the disc.
About Pagid Racing
PAGID Racing is the exclusive motorsport brand of the TMD Performance. As a member of the TMD Friction Group, TMD Performance is the worldwide sole distributor of PAGID Racing products and high performance brake pads for street legal cars.
The brake products are designed to produce the highest possible performance levels over a wide range of operating conditions, and are available in many different material formulations.
They fit most popular racing and high performance calipers and also may be fitted as an upgrade to many standard calipers for high performance cars.
In addition, PAGID Racing brake products are fitted as original equipment to some of the most prestigious and powerful production cars in the world including Audi, Bugatti, Ferrari and Porsche.
With the facilities in Leverkusen & Essen (Germany) and Troy (USA), TMD Performance is one of only a small number of companies capable of developing and manufacturing brake friction solutions according to customer-specific technical requirements in a short time.
Why buy from MS Motorsport?
MS Motorsport carries a large range Pagid brake pads in stock. Many BMW & Porsche trackday and racing teams know the way to MS Motosport if they require new pads or need advice about the brakes of their cars.
MS Motorsport supplies both professional race teams and trackday enthusiasts!
Please do not hesitate to contact us if you have any questions regarding brakepads for your car.
| SKU | E2126RST5 |
|---|---|
| Brand | Pagid |
| manufacturer partnumber | E2126 |
| Brake pad compound | RST5 |
| Location | Rear |
| Fits these AP Racing calipers | CP3215 D42 |
| Make | Ford |
| Model | Mustang FP350S [Race Car] |
Write Your Own Review
We found other products you might like!
Why buy from MS Motorsport?
MS Motorsport carries a large range Pagid brake pads in stock. Many BMW & Porsche trackday and racing teams know the way to MS Motosport if they require new pads or need advice about the brakes of their cars.
MS Motorsport supplies both professional race teams and trackday enthusiasts!
Please do not hesitate to contact us if you have any questions regarding brakepads for your car.
